• Carrinho
  • O carrinho está vazio!

Esqueceu-se da sua palavra-passe?

Or connect with

Microfone Shotgun CM-500 para fotografia com câmera DSLR

Vergriffen
Product Unavailable
No Cancellation Fee
42,99€ 29,99€
&Frete GRÁTIS nos países elegíveis
KF10.001
  • Marca: K&F Concept
  • Compre K&F Concept microfone shotgun cm-500 para fotografia com câmera dslr online, frete grátis e garantia de devolução de 30 dias.
  • KF10.001
  • Em stock: Vergriffen
  • 29.99
Compre mais de 2 itens e receba 10% de desconto !
Microfone Shotgun CM-500 para fotografia com câmera DSLR
Wholesale
Jellemzők
  • • A tecnologia de captação denoise da NCR oferece redução de ruído de alta potência. Design estrutural resistente a choques, para reduzir o ruído mecânico da câmera e outros ruídos de vibração.
  • • A distância efetiva de captação pode atingir 20 metros. Faça a captação mais longe, mais pura e melhor qualidade de som. Recursos de captação de ponto único em forma de coração podem efetivamente reduzir o ruído do ambiente ao redor.
  • • Microfone captador embutido profissional de alto desempenho em forma de coração, usando tecnologia de captação de interferência de ruído complementar de cabeça dupla.
  • • O produto está em conformidade com o padrão de compatibilidade eletromagnética da União Europeia 2004/108 / EC e os padrões FCC Parte 15. Não é compatível com a câmera Sony, a câmera Canon mirrorless e a câmera sem espelho Nikon.
  • • Todo o projeto do escudo do metal, adota a oxidação anódica de superfície, aparência contínua e delicada, tudo mostra o nível profissional.
Especificação
• Monômero: condensador de eletretos traseiro • Direcionalidade:
50Hz-16kHz em forma de coração
• Resposta em frequência: 50Hz-16KHz
• Intensidade de sensibilidade: + 10dB ± 2dB
• Sensibilidade: -37dB ± 3dB (0dB = 1V / Pa a 1kHz)
• O ruído equivalente nível: 24 dB A
• Nível Máximo de Pressão Sonora: 130dB (THD≤1,5% a 1KHz)
• Impedância de saída: 200Ω ± 30% (a 1kHz)
• Canal: Mono
• Tensão de trabalho: Pilha botão CR2032 Consumo de energia 4mA (valor típico)
• vida útil da bateria: a vida útil da bateria pode durar até 50-60 horas

Precauções

• Built-in professional condenser microphone, high sensitivity, be careful not to drop or intense impact
• The microphone should be stored in dry and clean place when not in use. Avoid to store or use in high temperature, high humidity and strong magnetic place
• The power switch should be drawn to "OFF" position when not in use, to save battery power and should remove the battery to prevent damage to the circuit because of battery leakage when not in use for a long time
• You need to replace a new battery in time when low power
• Please put the windproof cotton included together on the microphone to achieve a good effect of pick up

Advanced Compatibility

• USER FRIENDLY - Facilmente adaptável a qualquer dispositivo que possua MIC de 3,5 mm e ferradura.

• COMPATIBILIDADE AVANÇADA - Vem totalmente compatível com Canon, Pentax, Olympus, Câmera Digital SLR da Panasonic.

Por que escolher o conceito K & F?

Fabricante profissional dos acessórios 1.Professional.

2. Dedicado para fornecer produtos em alta qualidade e bom preço.

3. Todos os itens atendem às Normas Ambientais da RoHS, prêmio levantado. Loja com Garantia.

Avaliação geral   4.5   
Tem que criar uma logar ou Conta para poder comentar.

2016/06/21 00:00:00
5
Excellent mic with quality materials an excellent sound
Quick Review – Amazing build quality, excellent sound capturing, well designed, excellent record quality, highly recommended.General Verdict = great product, universal fitting, very light, excellent quality sound, huge value, much recommended product.Long ReviewGeneral – I have tried and used a couple of different mics for my camera and none have been anywhere as high a quality as this one, The design itself is simple yet effective, with high quality metal construction, this heart shaped unidirectional design works very well at picking up sound. The mic is powered by a CR2032 button cell battery (included) and lasts very well approx. 50-60 hours.There is a 3 way switch on top of the mic that switches it from off position to 0db (standard) to +10db (boosted) for better sound pickup over ranges, It fits quite well on the camera locking into place on the standard hot shoe point and requires a standard 3.5mm audio jack point on the camera to work correctly.Materials – The metals used in construction feel very sturdy and like it can take a knock or two without issues, the mount itself is plastic with built in cushioning to help reduce the impact from knocks and bangs, the included wind proof cotton sleeve for the mic is well constructed, no pits, tears or holes and fits the mic precisely providing a good natural noise reduction.Improvement Possibilities – This section should in no way be thought of as negative, this is just ideas I had for possible future thoughts for developing the product further.1. N/AOverall Verdict – outstanding mic, amazing quality & build, east fit and remove, provides excellent sound quality, amazing value for money.Thank You for readingCarl Fellows
Excellent mic with quality materials an excellent sound Excellent mic with quality materials an excellent sound Excellent mic with quality materials an excellent sound Excellent mic with quality materials an excellent sound
2015/11/22 00:00:00
5
Good external microphone. Read this if you can’t remove the battery. Must remember to turn it on before use
Disclaimer: I received this product for free in exchange for my honest & unbiased reviewIf you are shooting video, an external microphone is a must for anyone who wants decent sound – it improves the sound quality. It is bound to - the internal microphone, considering its tiny size, cannot hope to compete with one this big. The difference in sound quality is significant.This microphone comes in a good presentation box (see photo 1). This is important if it is a gift - it makes a difference. Some items come in brown cardboard boxes.Inside everything is stored in cutaway foam (photo 2).Photo 3 shows what you get in the box – the microphone, a cotton foam muffler and a CR2032 battery. The bank note is to give you an idea of the size.The muffler reduces wind noise. It is essential.Photos 4-5 shows it mounted on the hotshoe, with the cable plugged into the camera.Photo 6 shows the rear of the microphone. The end cap unscrews to insert the battery, which is included. To insert the battery, tilt it so that the 12 o’clock position is inserted and then push on the 6 o’clock position. It snaps in place.Tip: The instructions are wrong regarding how to remove the battery (a translation error, I assume) . They say that the ‘metal card’ has to be pushed ‘outwards’ (photo 8). In fact, you push the metal clip (in the 6 o’clock position) DOWN – the clip is on a spring and will move down, releasing the bottom of the battery (photo 9). The battery then levers out. I tell you as you will be cursing if you do not know how to do it and try to follow the instructions.The microphone has three settings – off, 0dB & +10 dB. The latter increases sensitivity (and noise too, naturally, so there is a price to pay) – but it is good to have.If you are not used to this microphone, please always check it is on before filming – if you are used to using the built-in microphone, it is SO easy to film your child’s birthday party or whatever with this new toy and then curse because you forgot to turn it on. Every time I press record, I first check that the microphone is turned on.Confusingly, the red LED on the top by the three-position switch (see photo 10 – the LED (transparent in the photo) is just beyond the +10dB setting) does not stay on when the microphone is on. It only turns on to indicate a low battery. In normal use, when you turn the microphone on that LED blinks for a fraction of a second, and dimly – I thought that it meant my factory-supplied battery was dead on arrival. I tested it – it wasn’t – the LED is designed that way.I carry a spare CR2032 battery, just in case.The manual includes two graphs showing the output response of the microphone (photos 11 & 12). I cannot verify them – all I can say is that the microphone improves the sound quality and I am very happy with it.
Good external microphone. Read this if you can’t remove the battery. Must remember to turn it on before use Good external microphone. Read this if you can’t remove the battery. Must remember to turn it on before use Good external microphone. Read this if you can’t remove the battery. Must remember to turn it on before use
2017/08/08 00:00:00
4
Pretty decent
This is a pretty decent, lightweight microphone, suitable for most DSLs and superzoom/bridge cameras that have a standard mic socket.It's got a cardoid response (with a fairly good rejection of sound from behind, but it cannae change the laws of physics). Sound quality is great for the price. Noise isn't overwhelming, as some older reviews say -- I suspect the internal electronics have been upgraded since then.Speaking of which, as a condenser mic, it needs power to drive those internal gubbins. So the package comes with a lithium button cell (not rechargeable). Mine hasn't run out yet, so I can't verify the 50 hour battery-life claim. Replacements are easily available, such as this six-pack, branded Panasonic.Curiously, I see one or two Amazon reviews saying the sound quality is no better than the built-in mics in their cameras. Either their cameras have excellent microphones, or they made the same mistake as I did at first: I failed to push the jack fully home! The Fuji socket is rather stiff, and it's recessed so it's hard to see that the jack isn't properly in.Also, don't forget it's a mono mic. I'd have thought this was obvious, but apparently not so!What would I improve? It would be good to have a low-battery indication. Also some rubber construction between the body and the camera mount might help attenuate the transmitted handling noise when you zoom, focus, etc. Otherwise, this might have got five stars.In case you were wondering, the body is 130 mm long with its foam sock on, and it sits 65 mm above the flash shoe.Unboxing photos attached, plus a photo of it attached to my Fuji X-S1.Full disclosure: I was asked to test this product by K&F/dcmall, but this review is my genuinely independent opinion.
Pretty decent Pretty decent
2015/11/04 00:00:00
5
A good value and high performing camera microphone
This K&F Concept Camera Microphone comes presentably boxed and in the package apart from the microphone you get a foam windshield, CR2032 button cell and a decent set of illustrated instructions. We used this microphone with a Nikon D7200 DSLR on a recent trip to photograph some Kingfishers. The microphone has a claimed frequency response of 50Hz to 16KHz and an impedance of 200 Ohms.The immediate impression is of good quality product which is largely of metal construction. This mono microphone is powered by a CR2032 which should last 50-60 hours before an LED indicator flashes to warn of a low battery condition. The battery is easily fitted by opening a screwed door at the rear of the microphone. There's a short 3.5mm audio lead which plugs into the camera and the microphone is easily fitted to the camera via the integral hot shoe mount. The only control is an on/off switch which can also enhance the sensitivity by 10db. I personally prefer to use the microphone with the foam windshield on.In the field we found this microphone performed well. There was very little mechanical noise from the camera and although wind noise was kept to a minimum plenty of both foreground and background detail was captured including birdsong. The sensitivity enhancement switch produced a noticeable effect albeit at the obvious expense of slightly more noise. Because of its light weight this is an easy microphone to manage too. Overall we are delighted with the audio quality captured by this microphone and would unhesitatingly recommended it as good value solution for a DSLR or camcorder user. Recommended.(Disclosure: I was provided with a free sample for review - the opinion above is my honest view of the product).
A good value and high performing camera microphone
2019/04/23 00:00:00
5
Great mic.
I tend to use leveller mics for most of my work but this has performed admirably at times when it is required.
Camera, Microphone & Crane Unboxing! (Ordro HDV-Z20, K&F Concept, and Glide Gear Camera Crane)
UNBOXING - MICROFONO A CONDENSATORE ECONOMICO PER FOTOCAMERA REFLEX - K&F CONCEPT
Is It Really Worth It? K&F Concept DSLR Microphone Review & Testing
Ask Question   
Tem que criar uma logar ou Conta para poder comentar.

These images belong to K&F Concept end users.