• Carrinho
  • O carrinho está vazio!

  • Wish List
  • A lista de favoritos está vazia.

Esqueceu-se da sua palavra-passe?

Or connect with

Tripé de câmera de 51”/129cm Tripés de viagem de alumínio flexível portátil 17,63 libras Carregar com monopé portátil e bolsa de transporte para câmeras DSLR

Escreva um comentário KF09.097
Special
Existente
  • days
  • :
  • :
  • :
69,99€ 114,23€ 38% OFF
&Frete GRÁTIS nos países elegíveis
  • Marca: K&F Concept
  • Compre K&F Concept tripé de câmera de 51”/129cm tripés de viagem de alumínio flexível portátil 17,63 libras carregar com monopé portátil e bolsa de transporte para câmeras dslr online, frete grátis e garantia de devolução de 30 dias.
  • KF09.097
  • Modelo: KF09.097
  • 69.99
Características
  • • 【Leve e portátil】 Tubo de tripé feito de liga de alumínio de qualidade pesa apenas 2,20 libras, mede 13,38 "de comprimento quando dobrado, superleve e compacto com capacidade de carga de até 17,63 libras / 8 kg, tornando-o ideal para fotografia interna e externa.
  • • 【Conveniente e flexível】 tubo de 22 mm de diâmetro, pernas de 5 seções com botão de travamento em espiral que permitem ajustar a altura de trabalho de 17,71 "a 61" em segundos; As pernas do tripé podem ser ajustadas em três níveis de ângulo de abertura para estabilizar em vários terrenos e níveis de inclinação.
  • • 【Monopé Destacável】 Este tripé pode ser desmontado rapidamente com o parafuso do eixo central e se transformar em um monopé, proporcionando uma forma alternativa de fotografar com facilidade.
  • • 【Cabeça esférica panorâmica de 360 ​​°】 A cabeça esférica de 25 mm especialmente projetada pode girar 360 ° e obter ângulos livres, permitindo obter a foto perfeita e um panorama incrível sempre.
  • • 【Ampla compatibilidade】 O parafuso de 1/4 "de liberação rápida é adequado para a maioria das câmeras, câmeras DSLR, projetores e telescópios, etc; Seu telefone também pode ser conectado através de um suporte de telefone extra.

Cor Laranja, preto
Pernas dobradas para armazenamento sim
Com monopé sim
A coluna central pode ser travada em um ângulo de 90 ° Não
Tipo de Bloqueio Bloqueio tipo espiral
Material Liga de alumínio
Seções de perna 5
Seções da coluna central sim
Diâmetro mín. Do tubo (mm) 10mm
Diâmetro máx. Do tubo (mm) 22mm
Altura máxima (com a coluna central elevada) (mm) 61 "
Máx. Altura (com a coluna central para baixo) (mm)
Min. Altura (mm) 13 "
Altura dobrada (mm) 13 "
Capacidade de carga (kg) 17,63 libras
Peso do produto (g) 2,20 libras
Comentários (0)
Tem que criar uma logar ou Conta para poder comentar.

5
Nice tripod strong and sturdy dose the job
2021/08/26 17:28:53
5
Very happy with this tripod
2021/08/25 14:03:28
4
Hook of shoulder strap is missed. Hope Amazon help me to change it.
2021/08/24 17:29:42
5
I bought this tripod to replace my top-quality Manfrotto, which has been a trusty companion for over 20 years of professional photography.

I needed a smaller, but still solid tripod to fit in the back box of my Honda 50, along with a large medium format camera, for local photo-trips. I measured the back box interior and noted the dimensions information that was given with the tripod, and it fits perfectly (see photo).

I was a bit dubious about the ball head holding my very heavy camera, so I replaced it with the heavy-duty pan and tilt head from the Manfrotto and it works perfectly. I've put the ball head from this one on the Manfrotto to hold a DSLR that I use for digitizing negs.

No, it's not as sold and robust as the Manfrotto (which cost 3 times as much), and that's to be expected. But it looks like it will do the job, and saves me from putting a really heavy tripod on my back when I go out on the bike!
2021/08/15 16:44:58
5
K & F products first caught my eye at the Photography show back in 2019 but I didn't really have a close look at any of their tripods as I was fixated on getting a Three Legged Thing. As it turned out I didn't buy anything and didn't get a tripod for more than a year. With finances tight I decided to take a chance on a K & F tripod figuring at that price it wouldn't be too much of a wrench if it wasn't great. I was very pleasantly surprised when it arrived to find that it was more than I expected for the money - seemingly very well built and nice and light into the bargain with a quality carry bag. There are only two negatives in my mind - why use all that lovely magnesium alloy and then stick on plastic knobs for the ball clamp and adjustment? Surely it wouldn't have increased the cost too much to make these in the same alloy? The ball clamp did click ominously one time I tightened it so I'm hoping it isn't going to be a possible weak point. Also, the tripod leg that unscrews to make up the monopod - the female thread is metal but I believe the male thread is plastic, why? I doubt I'll use this feature much so not too much of a concern. I wouldn't hold out much hope with customer services - I did email them about something and had a very strange reply. I don't think I'd even bother trying to pursue a warranty claim. TLT on the other hand are great to deal with and solved a problem with my Ellie very quickly.
It would have been nice to have detachable feet but I guess you can't have everything at this price point? The tripod has a very large height extension so unless you're over 6' 5" you won't have any problems using it. Lastly I really like the orange colour of the alloy components - it matches my Three Legged Thing Ellie L bracket perfectly! I honestly don't think you can go wrong at this price - mine will certainly suit my needs until I can upgrade to a carbon TLT in the future.
2021/08/14 16:43:52
Gallery

These images belong to K&F Concept end users.

FAQs
Tem que criar uma logar ou Conta para poder comentar.

A
Para saber como instalar a coluna central, consulte este vídeo https://youtu.be/3BvJKWNElRg. 
A
Para saber como instalar o sistema de travamento do pé, consulte este vídeo https://youtu.be/jZb6Fn6T_u0. 
A
To hold telephoto lens, it is recommended to use a tripod mount ring additionally for better balance. Meanwhile, it is better to hang some heavy thing to the hook to lower the center of gravity on this tripod to make it more sturdy and less prone to vibrations. 
A
You still use the center pole with articulating ball and plate on top. Hole the curved metal piece on the bottom of the center pole and unscrew it, then the middle bar will slide up and out of the tripod and screw into the top of the monopod leg. 
Especificação
Tripod General
Capacidade de carga 8kg/17.64lbs
Altura Máxima de Trabalho 1290mm/50.79"
Altura máxima sem coluna central 1010mm/39.76"
Altura Mínima de Trabalho 440mm/17.32"
Dobra Comprimento 337mm/13.27"
Peso 1168g/2.57lbs
Materiais Magnalium Alloy
Cabeça de bola Ball Head
Cor Orange/Black
Nível de bolha
Tripod Legs
Leg tipo de bloqueio Spiral Type Lock
Posições das pernas
Extensão de perna independente
Seções de perna 5
Diâmetro da perna 10-22mm/0.39-0.87"
Características dos pés
Tripod Center Column
Recursos da coluna central Center Column Inversion
Seções da coluna central 2